Determining the Molar Volume of Hydrogen Gas
React magnesium with hydrochloric acid, collect hydrogen over water, and calculate molar volume at STP.
Background Information
Reaction and stoichiometry
Magnesium reacts with excess hydrochloric acid to produce aqueous magnesium chloride and hydrogen gas:
One mole of magnesium produces one mole of hydrogen, provided magnesium reacts completely and hydrochloric acid is in excess. The molar mass of magnesium is 24.305 g/mol.
Collecting gas over water
Hydrogen collected in an inverted graduated cylinder is mixed with water vapour. If the water levels inside and outside the cylinder are equal, the dry hydrogen pressure is P(H₂) = P(atmosphere) − P(H₂O). If levels differ, a hydrostatic pressure correction is also needed; this simulation assumes equal water levels.
Converting to standard conditions
Use the combined gas law with absolute temperatures: V(STP) = V(lab) × [P(H₂)/101.325 kPa] × [273.15 K/T(lab)]. This lab defines STP as 0 °C and 101.325 kPa, giving an ideal molar volume of approximately 22.414 L/mol. Other STP conventions exist.
Sources of error
Possible errors include hydrogen leakage, incomplete reaction, trapped air, inaccurate volume readings, and failure to correct for water vapour. Real gases and experimental conditions may deviate from the ideal model.
Print or save the assignment, perform the virtual lab, record observations and complete your lab report.
Student Lab Assignment
Research question: What molar volume of hydrogen gas can be determined experimentally from the reaction of magnesium and hydrochloric acid after correcting for water vapour and standard conditions?
Learning goals
Balance the reaction, identify the limiting reactant, apply gas-pressure corrections, convert gas volumes to STP, and assess experimental uncertainty.
Required procedure
- Read the background and identify the gas-collection assumptions.
- Set magnesium mass, acid concentration and volume, temperature, and atmospheric pressure.
- Run and record at least three trials with different magnesium masses.
- Calculate moles of hydrogen, corrected dry hydrogen pressure, volume at STP, and molar volume for each trial.
- Calculate the mean experimental molar volume and percentage error relative to 22.414 L/mol.
- Explain at least two potential experimental errors and submit your completed report.
Experimental Controls
Set conditions, then run the experiment.
Virtual Gas Collection Apparatus
Recorded Trials & Results
| Trial | Mg (g) | T (°C) | P atm (kPa) | P H₂O (kPa) | Wet V (mL) | Dry P (kPa) | STP V (mL) | H₂ (mol) | L/mol |
|---|
Gas Volume vs Magnesium Mass
Formal Laboratory Report
Report responses autosave on this device. PDF output uses your browser's Print → Save as PDF option.
Teacher Resources
Suggested assessment (KTCA): Knowledge 25%, Thinking 35%, Communication 20%, Application 20%.
Reference reaction: Mg(s) + 2 HCl(aq) → MgCl₂(aq) + H₂(g).
Reference molar volume: 22.414 L/mol at 273.15 K and 101.325 kPa (ideal gas).
Model assumptions: Equal water levels inside and outside the gas cylinder, complete reaction if acid is in excess, ideal-gas behavior, water-vapour pressure from a temperature-dependent approximation, and a small deterministic measurement offset. No reaction is simulated if acid is limiting: the generated amount of hydrogen then follows the limiting reactant stoichiometry.
Assessment prompts: Why subtract water vapour pressure? Why use kelvin? What happens if hydrogen leaks? How does insufficient acid affect the mole calculation?