Combustion Reactions & Formation of Oxides
Grade 11 Chemistry · Two investigations · Simulated observations · Formal lab report
Background Information
Combustion is a reaction between a fuel and an oxidant, commonly oxygen, that releases energy. Hydrocarbons undergoing complete combustion form carbon dioxide and water when sufficient oxygen is available. Oxygen-limited combustion may produce carbon monoxide and/or solid carbon (soot), depending on conditions.
Real flames may produce mixtures of CO₂, CO, soot and other species. The model below selects idealized pathways for instructional comparison; it does not predict actual flame chemistry.
Formation and classification of oxides
Many metals form metal oxides when they react with oxygen; these are often basic, although not all metal oxides behave identically. Many nonmetal oxides are acidic. For example:
Magnesium oxide reacts with water to a limited extent to produce magnesium hydroxide, giving a basic suspension. Dissolved carbon dioxide forms a weakly acidic solution through carbonic-acid equilibria.
Conservation of atoms and balancing
Balanced equations conserve each element. Coefficients represent mole ratios, not changes to chemical subscripts. Use these ratios to compare oxygen demand and products.
Print or save the assignment, perform the virtual lab, record observations and complete your lab report.
Student Lab Assignment
Research question: How does oxygen availability influence the products of hydrocarbon combustion, and how do metal and nonmetal oxides differ in their reactions with water?
Part A — Combustion
- Select methane, propane, or ethanol as fuel.
- Run a complete-combustion condition and an oxygen-limited condition for the same fuel.
- Record the balanced equations, predicted products, visible observations, and oxygen demand.
- Compare at least two fuels and explain why incomplete combustion is a safety concern.
Part B — Oxides
- Select magnesium oxide, calcium oxide, or carbon dioxide.
- Simulate adding the oxide to water and testing pH.
- Record the reaction or equilibrium, expected pH category, and interpretation.
- Explain why oxide classification is a useful generalization rather than a universal rule.
Minimum evidence: Four combustion trials, three oxide trials, two balanced equations with explanation, and a complete formal lab report.
Station A — Combustion
Station B — Oxides & Water
Recorded Data
| # | Investigation | Sample | Condition | Predicted products / observation | Equation |
|---|
Combustion Trials by Condition
Bars show the number of recorded simulation trials, not a measured chemical quantity.Formal Laboratory Report
Experimental Results
Teacher Resources
Modelled observations — not laboratory measurements
Learning goals: balance combustion and oxide-formation equations; distinguish complete and oxygen-limited combustion; describe products and hazards; classify representative oxides; communicate evidence in a formal report.
Suggested KTCA rubric
| Category | Weight | Evidence |
|---|---|---|
| Knowledge | 25% | Terminology, equations, product identification |
| Thinking | 35% | Comparisons, predictions, evaluation of model limitations |
| Communication | 20% | Organization, equations, tables, clarity |
| Application | 20% | Safety, environmental implications, oxide chemistry |
Scientific limitations
Oxygen-limited pathways are idealized and do not simulate thermodynamics, reaction kinetics, soot yields, flame temperature, oxygen partial pressure or actual gas analysis. The oxide pH values are illustrative categories; MgO has limited solubility and carbonic acid is an equilibrium system. Avoid interpreting the displayed pH as a calibrated measurement.
Assessment note: The student interface provides balanced equations as learning feedback. For summative assessment, require independent explanation and original analysis rather than memorization.