Acid–Base Titration: Determine an Unknown Acid Concentration
Interactive simulation · Synthetic measurements · No account required
Background Information
A titration determines the concentration of an unknown solution using a standard solution of known concentration. In this investigation, a measured volume of hydrochloric acid is titrated with standardized sodium hydroxide.
Balanced reaction: HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l)
The stoichiometric mole ratio is 1:1. At equivalence, moles of NaOH added equal the initial moles of HCl. For a monoprotic strong acid, CacidVacid = CbaseVbase,eq, with volumes in the same units.
Endpoint vs equivalence: The equivalence point is the stoichiometric point; an indicator's endpoint is an observable colour change that approximates it. Phenolphthalein changes from colourless to pale pink as the solution becomes basic. A persistent faint pink indicates the endpoint; a dark pink usually means overshooting.
Read the burette to the nearest 0.01 mL in a real laboratory, rinse glassware appropriately, remove air bubbles from the tip, and use goggles. This virtual lab is a model, not a substitute for physical laboratory safety training.
Print or save the assignment, perform the virtual lab, record observations and complete your lab report.
Student Assignment
Research question: What is the molar concentration of an unknown hydrochloric acid sample when titrated with 0.1000 mol/L NaOH?
- Record a hypothesis and identify the independent, dependent and controlled variables.
- Measure a 25.00 mL aliquot of unknown acid. Record the initial burette reading.
- Carry out one rough titration and at least three careful titrations, using smaller increments near the endpoint.
- Record initial and final burette readings, titre volumes, and endpoint observations.
- Use concordant titres (within 0.20 mL where practical) to calculate mean titre and unknown concentration.
- Explain the endpoint/equivalence distinction, identify sources of error, and write a conclusion.
Submission: Complete the Lab Report tab and use Print / Save PDF. Attach the report to your teacher's learning management system.
Virtual Titration Bench
Live Readings
pH vs volume added
Recorded Titrations
| Trial | Type | Initial (mL) | Final (mL) | Titre (mL) | Endpoint |
|---|
The mean uses recorded careful trials with an observed endpoint. Check agreement among titres before reporting your final result.
Formal Laboratory Report
Recorded results
Teacher Resources
Learning outcomes: neutralization stoichiometry, accurate burette readings, identification of an endpoint, calculation of unknown molarity, and evaluation of uncertainty.
Suggested KTCA rubric: Knowledge 25%; Thinking 35%; Communication 20%; Application 20%.
Model: A fixed hidden HCl concentration is assigned to this lab instance; NaOH is 0.1000 M, HCl aliquot 25.00 mL, and strong acid/base dissociation is treated as complete. pH is calculated using excess H⁺ or OH⁻ and water autoionization at equivalence. Phenolphthalein appearance is idealized at pH 8.2.
Assessment guidance: Require at least three careful endpoint trials; students should distinguish an overshot endpoint from an accurate one and discuss the consequences for calculated concentration. Compare their results to the reference value below.