Grade 9 – Grade 12 Science Tool

Significant Figures Calculator

A significant figures calculator counts how many digits in a measurement actually carry information, rounds a number to a chosen number of those digits, and works out how many belong in the answer to a calculation. This one does all three, shows the rule it applied at every step, and tells you when a number is written ambiguously instead of quietly guessing what you meant.

TRY ONE

How to count significant figures

Significant figures are the digits in a measurement that were actually determined by the measurement, as opposed to the digits that only show where the decimal point goes. A balance reading 4.56 g has three significant figures because a person could read three digits off it. Six rules cover every case.

RuleWhyExample
Non-zero digits always countEvery one came from the measurement45.6 → 3 s.f.
Zeros between non-zero digits countA reading had to be taken to know it was a zero4005 → 4 s.f.
Leading zeros never countThey only position the decimal point0.0045 → 2 s.f.
Trailing zeros after a decimal point countNobody writes them unless they were measured4.500 → 4 s.f.
Trailing zeros in a whole number are ambiguousNothing distinguishes a measured zero from a placeholder4500 → 2, 3 or 4 s.f.
Exact numbers have unlimited significant figuresCounted and defined values carry no uncertainty12 eggs; 1 km ≡ 1000 m

How many significant figures does each of these have?

These are the numbers people most often look up, with the count and the reason.

NumberSignificant figuresReason
1001Trailing zeros in a whole number are read as placeholders
100.3The written decimal point makes the zeros count
100.04A digit after the point means every zero was measured
0.011Leading zeros position the point and nothing else
0.0102The final zero is after the point, so it counts
0.002083The zero between 2 and 8 counts; the leading ones do not
1.0 × 1032Only the digits in the mantissa count
6.022 × 10234The exponent records size, not precision
0.0005003Leading zeros out, trailing zeros after the point in
40054Captive zeros always count
45.604The trailing zero follows a decimal point
12002, 3 or 4Ambiguous as written; scientific notation settles it

The rules for calculations

Which rule applies depends on the operation, and that catches people out more than counting does. Multiplication and division are governed by significant figures. Addition and subtraction are governed by decimal places. The two are not interchangeable, and a calculation containing both has to switch between them.

Multiplication and division

The answer keeps as many significant figures as the input that has the fewest. For example, 4.321 × 3.14 = 13.56794 on a calculator, but 3.14 has only three significant figures, so the answer is 13.6.

Addition and subtraction

The answer is rounded to the decimal place of the input that is least precise, which has nothing to do with how many significant figures each input has. For example, 128.1 + 1.72 + 0.457 = 130.277, and because 128.1 is only given to one decimal place, the answer is 130.3.

Mixed calculations

Carry the full unrounded value from one step to the next and round once, at the end. Rounding at every step introduces an error that grows with the number of steps. In 12.13 + 1.72 × 3.4, the multiplication gives 5.848, which is limited to two significant figures, so it is precise to the first decimal place; adding 12.13 gives 17.978, and the answer is 18.0.

Logarithms

In a logarithm only the digits after the decimal point are significant, because the digits before it record the power of ten rather than the measurement. The log of a value with three significant figures is quoted to three decimal places: log(2.50 × 10−4) = −3.602. Going the other way, the number of decimal places in the exponent becomes the number of significant figures in the answer, which is why a pH of 4.35 gives a hydrogen ion concentration of 4.5 × 10−5 M, with two significant figures and not more.

Exact numbers

Counted quantities and defined conversions have unlimited significant figures and never limit an answer. There are exactly 12 items in a dozen and exactly 1000 metres in a kilometre, so dividing a measured 45.2 g by 3 beakers gives 15.1 g, keeping the three significant figures of the measurement rather than dropping to one.

The short version. Multiplication and division: count significant figures and keep the smallest. Addition and subtraction: count decimal places and keep the fewest. Logarithms: significant figures in become decimal places out. Exact values: ignore them when deciding precision. Round once, at the end.

The trailing zero problem

Written as it stands, 1200 could have been measured to the nearest hundred, the nearest ten or the nearest unit, and the notation gives no way to tell. This is a real ambiguity in the notation rather than a rule students have failed to learn, and textbooks resolve it differently: many treat the trailing zeros as placeholders, some treat a written number as fully significant, and some call the number simply undefined.

Scientific notation removes the ambiguity completely, which is the main reason scientists use it. Writing 1.2 × 103 states two significant figures, 1.20 × 103 states three, and 1.200 × 103 states four. A trailing decimal point does the same job in less space: 1200. means all four digits count. The calculator above flags any number with this ambiguity and lets you switch between the two conventions, so you can match whichever one your course uses.

Worked examples

ProblemAnswerWhy
5.452 g ÷ 1.67 cm³3.26 g/cm³1.67 has 3 s.f. and limits the division
4.321 × 3.1413.63.14 has 3 s.f.
128.1 + 1.72 + 0.457130.3128.1 is only good to one decimal place
12.13 + 1.72 × 3.418.0Multiply first, round once at the end
100.0 − 99.80.2Both are good to one decimal place, and only one digit survives
2648 to 3 s.f.2650The next digit is 8, so the 4 rounds up
0.004562 to 2 s.f.0.0046Leading zeros are not figures, so counting starts at the 4
45.2 g ÷ 3 beakers15.1 gA counted 3 is exact and does not limit anything

Where marks get lost

Frequently asked questions

How many significant figures does 100 have?

Written plainly, 100 has one significant figure, because trailing zeros in a whole number with no decimal point are normally read as placeholders. Writing 100. gives three significant figures and 1.00 × 102 states three unambiguously.

Do zeros count as significant figures?

It depends where the zero sits. A zero between non-zero digits always counts, as in 4005. A zero after a decimal point and after a non-zero digit counts, as in 4.50. A zero before the first non-zero digit never counts, as in 0.0045. A trailing zero in a whole number with no decimal point is ambiguous.

What is the rule for significant figures in addition?

In addition and subtraction the answer is rounded to the same decimal place as the least precise input, not to a number of significant figures. Adding 128.1 and 1.72 gives 129.82, which is rounded to 129.8 because 128.1 is only given to one decimal place.

Why does my answer have fewer significant figures than the numbers I started with?

Subtracting two numbers that are close together cancels the digits they agree on and leaves far fewer behind. 100.0 − 99.8 = 0.2 turns four significant figures into one. This is a real loss of information rather than a mistake, and it is why laboratory methods avoid measuring a small difference between two large readings.

Should I round at every step of a calculation?

No. Carry the full unrounded value through every intermediate step and round only the final answer. Rounding at each step introduces an error that compounds, and in a long calculation it can move the last significant digit.

How many significant figures should a final answer have?

As many as the least precise measurement that went into it allows, once the appropriate rule has been applied at each step. Exact and counted values are ignored when making this decision because they carry no uncertainty.

Does 0 have significant figures?

A bare 0 is treated as having one significant figure. A measured zero written as 0.00 claims precision to two decimal places, and in a calculation what matters is the decimal place it is quoted to rather than a figure count.

How do significant figures work in scientific notation?

Only the digits in the mantissa are significant, because the power of ten records size rather than precision. 6.022 × 1023 has four significant figures, and 1.0 × 103 has two.

What is the difference between significant figures and decimal places?

Significant figures count the meaningful digits from the first non-zero digit onwards, wherever the decimal point falls. Decimal places count digits after the point. 0.0456 has three significant figures and four decimal places.

Is 5 always rounded up?

Under the rule taught in most school courses, yes: a digit of 5 rounds the previous digit up, so 2.675 becomes 2.68 at three significant figures. Many laboratories and the ASTM standard instead round a tie to the nearest even digit, making 2.665 become 2.66 and 2.675 become 2.68, which avoids a slight upward bias across many measurements. The calculator above offers both.

Related tools and practice

Everything here is free

Print or use as many copies as your class needs. An account only saves favourites and quiz results.

All tools Browse by grade