SCH4C · Grade 12 College Chemistry · Free interactive simulation
Background Information
Combustion is a reaction between a fuel and oxygen that releases energy. In complete combustion of a hydrocarbon, sufficient oxygen is available and the principal products are carbon dioxide and water. In incomplete combustion, limited oxygen can produce carbon monoxide and/or solid carbon (soot), as well as water and sometimes carbon dioxide.
Complete combustion (methane)
CH₄ + 2O₂ → CO₂ + 2H₂O
Incomplete combustion (illustrative)
2CH₄ + 3O₂ → 2CO + 4H₂O
CH₄ + O₂ → C + 2H₂O
Tests for products
Carbon dioxide: bubbling the gas through limewater (aqueous calcium hydroxide) forms a cloudy calcium carbonate precipitate: CO₂ + Ca(OH)₂ → CaCO₃(s) + H₂O. Water: cooling combustion gases can produce liquid condensation on a cool surface; condensation alone is not a chemically specific identification test. A laboratory may use anhydrous copper(II) sulfate or cobalt chloride paper under appropriate safety procedures for a more specific test.
Carbon monoxide: a colourless, odourless, poisonous gas. A smoky yellow flame can indicate incomplete combustion, but flame colour alone cannot prove the identity or amount of any product.
Safety: This is a simulation. Do not burn fuels indoors, deliberately produce carbon monoxide, or attempt product testing without qualified supervision and appropriate equipment.
Print or save the assignment, perform the virtual lab, record observations and complete your lab report.
Student Assignment
Research question: How does oxygen availability affect the products of hydrocarbon combustion?
Read the background and write a prediction comparing high and low oxygen conditions.
Choose methane, propane, or butane as a fuel. Run a high-oxygen trial and record flame appearance, limewater result, condensation, and predicted products.
Repeat with medium and low oxygen. Use the same fuel to control variables.
Repeat at least one condition to assess consistency; try a second fuel for comparison.
Record at least four trials, export the data, and complete the lab report with balanced equations and safety considerations.
Success criteria: distinguish complete from incomplete combustion; interpret the limits of qualitative tests; write balanced equations; support a conclusion with observations.
Virtual Experiment
Choose conditions, then run the simulation.
Run the experiment to reveal observations.
The apparatus and product indicators are schematic. The simulation uses qualitative rules, not measured gas concentrations or reaction kinetics.
Data & Graphs
Each recorded trial represents a simulated qualitative observation. The chart shows the number of trials by oxygen condition, not chemical yield.
#
Fuel
Oxygen
Flame
Limewater
Condensation
CO / soot risk
Remove
No trials recorded.
Recorded trial counts
Student Lab Report
Drafts autosave in this browser. Use JSON export to transfer work between devices.
Teacher Resources
Course: SCH4C, Grade 12 College Chemistry. Suggested duration: 40–60 minutes. Mode: ungraded practice, formative assessment, or adapted virtual investigation.
Connects incomplete combustion to ventilation and CO safety
5
Reference guidance
Ample oxygen generally favours CO₂ and H₂O; oxygen limitation increases the potential for CO and soot. A positive limewater test indicates CO₂ was present in the sampled gas, but does not rule out CO. Condensation on a cool surface is consistent with water vapour but is not a specific chemical identification. In real flames, products depend on mixing, temperature, residence time, and other factors, not oxygen availability alone.
Scientific limitations: Three qualitative oxygen settings simplify a complex process. This simulation intentionally does not estimate stoichiometric product fractions, temperature, flame spectra, or toxic gas exposure. Avoid using its outputs as quantitative predictions.
Safety: No real combustion is needed. Carbon monoxide is hazardous and cannot be detected reliably by sight or smell.