Quiz

Electrolytic Cells

Twenty questions comparing the two cell types: why the electrode signs flip while oxidation stays at the anode, the electrolysis of molten sodium chloride, minimum applied voltage and overpotential, electroplating, and a rechargeable…

20 questions
15 min
Intermediate
Grade 12
Electrolytic Cells
Twenty questions comparing the two cell types: why the electrode signs flip while oxidation stays at the anode, the electrolysis of molten sodium chloride, minimum applied voltage and overpotential…
20
Questions
15m
Time limit
Question 1 of 20
⏱ 0:00
Score: 0
Question 1
Correct!
Quiz complete
Here's how you did:
0%
Score
Browse more quizzes

About this quiz

Twenty questions comparing the two cell types: why the electrode signs flip while oxidation stays at the anode, the electrolysis of molten sodium chloride, minimum applied voltage and overpotential, electroplating, and a rechargeable battery that is each kind of cell in turn. Every answer is explained.

Electrolytic Cells

Name: Date:

Questions in this quiz

  1. An electrolytic cell uses electricity to
    • A. drive a non-spontaneous reaction
    • B. speed up a spontaneous reaction
    • C. store chemical energy as heat
    • D. measure an unknown cell potential
  2. For the reaction forced in an electrolytic cell, E°cell is
    • A. positive
    • B. negative
    • C. zero
    • D. always exactly −1.00 V
  3. In both galvanic and electrolytic cells, oxidation happens at
    • A. the cathode
    • B. the anode in galvanic and the cathode in electrolytic cells
    • C. the anode
    • D. whichever electrode carries the negative charge
  4. Which statement about the anode is correct?
    • A. it is positive in a galvanic cell and negative in an electrolytic one
    • B. it is the negative electrode in both kinds of cell
    • C. it is the positive electrode in both kinds of cell
    • D. it is negative in a galvanic cell and positive in an electrolytic one
  5. The electrode signs differ between the two cell types because
    • A. in electrolysis an outside supply decides which is which
    • B. oxidation and reduction swap electrodes in electrolysis
    • C. the electrolyte carries the opposite charge in electrolysis
    • D. the electrons travel the other way through the electrolyte
  6. In both kinds of cell, electrons in the external circuit travel
    • A. from the cathode to the anode
    • B. from the anode to the cathode
    • C. from anode to cathode in galvanic cells only
    • D. in opposite directions in the two cell types
  7. Molten sodium chloride is electrolysed. At the cathode you get
    • A. chlorine gas
    • B. solid sodium chloride
    • C. sodium metal
    • D. oxygen gas
  8. In the electrolysis of molten sodium chloride, at the anode you get
    • A. sodium metal
    • B. hydrogen gas
    • C. sodium hydroxide
    • D. chlorine gas
  9. Why is molten sodium chloride used rather than a solution?
    • A. in solution the water is reduced instead of the sodium
    • B. in solution the salt does not conduct at all
    • C. molten salt gives a higher cell voltage
    • D. sodium chloride will not dissolve in water
  10. The minimum voltage needed to drive an electrolysis is
    • A. the sum of the two standard reduction potentials
    • B. the size of the negative E°cell, with the sign dropped
    • C. zero, since no reaction is spontaneous anyway
    • D. the product of the charge and the cell potential
  11. In practice a higher voltage than the minimum is needed, because of
    • A. the Faraday constant being only approximate
    • B. the temperature being below 25 °C
    • C. overpotential and resistance within the cell
    • D. the electrodes being made out of metal
  12. A rechargeable battery while it is being charged is acting as
    • A. a galvanic cell
    • B. neither kind of cell
    • C. both kinds at the same time
    • D. an electrolytic cell
  13. That same battery while it is powering a phone is acting as
    • A. a galvanic cell
    • B. an electrolytic cell
    • C. neither kind of cell
    • D. a concentration cell only
  14. In electroplating, the object being plated is made
    • A. the anode
    • B. the cathode
    • C. part of the salt bridge
    • D. either electrode, as convenient
  15. To silver-plate a spoon, the electrolyte must contain
    • A. silver metal filings
    • B. Cl⁻ ions only
    • C. Ag⁺ ions
    • D. no ions at all
  16. During silver-plating, the silver anode
    • A. stays unchanged throughout the process
    • B. gains mass as the plating continues
    • C. has to be made of an inert metal
    • D. dissolves to replace the ions deposited
  17. Does an electrolytic cell need a salt bridge?
    • A. usually not, since both electrodes share one electrolyte
    • B. yes, for the same reason a galvanic cell does
    • C. yes, but only when the electrolyte is molten
    • D. no, because no ions move during electrolysis
  18. The energy conversion in an electrolytic cell goes
    • A. chemical to electrical
    • B. electrical to chemical
    • C. chemical to thermal
    • D. electrical to thermal only
  19. Which of these is an industrial use of electrolysis?
    • A. generating power from zinc and copper
    • B. measuring the pH of a solution
    • C. extracting aluminium from its ore
    • D. running a hydrogen fuel cell
  20. The one thing galvanic and electrolytic cells definitely share is
    • A. a positive cell potential for the reaction
    • B. the same sign on each of the electrodes
    • C. a spontaneous overall reaction
    • D. oxidation at the anode and reduction at the cathode
Show answer key
Answer key — Electrolytic Cells
  1. 1. A
  2. 2. B
  3. 3. C
  4. 4. D
  5. 5. A
  6. 6. B
  7. 7. C
  8. 8. D
  9. 9. A
  10. 10. B
  11. 11. C
  12. 12. D
  13. 13. A
  14. 14. B
  15. 15. C
  16. 16. D
  17. 17. A
  18. 18. B
  19. 19. C
  20. 20. D
Electrolytic Cells — worksheetgalaxy.com