Quiz

Corrosion and Cathodic Protection

Twenty questions treating rust as the redox process it is: both half-reactions, why salt water and acid speed it up, and how cathodic protection, a sacrificial anode and galvanising each work — including why tin plate rusts faster once…

20 questions
15 min
Intermediate
Grade 12
Corrosion and Cathodic Protection
Twenty questions treating rust as the redox process it is: both half-reactions, why salt water and acid speed it up, and how cathodic protection, a sacrificial anode and galvanising each work —…
20
Questions
15m
Time limit
Question 1 of 20
⏱ 0:00
Score: 0
Question 1
Correct!
Quiz complete
Here's how you did:
0%
Score
Browse more quizzes

About this quiz

Twenty questions treating rust as the redox process it is: both half-reactions, why salt water and acid speed it up, and how cathodic protection, a sacrificial anode and galvanising each work — including why tin plate rusts faster once scratched and zinc does not. Every answer is explained.

Corrosion and Cathodic Protection

Name: Date:

Questions in this quiz

  1. Rusting is
    • A. the oxidation of iron in water and oxygen
    • B. the reduction of iron by water
    • C. the dissolving of iron in acid only
    • D. a process involving no electron transfer
  2. The formula usually given for rust is
    • A. FeO
    • B. Fe₂O₃·xH₂O
    • C. Fe(OH)₂
    • D. Fe₃C
  3. In rusting, the iron acts as
    • A. the oxidising agent, being reduced
    • B. a catalyst for the reaction
    • C. the reducing agent, being oxidised
    • D. a spectator species
  4. The oxidising agent in rusting is
    • A. iron
    • B. water
    • C. carbon dioxide
    • D. oxygen
  5. The anodic half-reaction in rusting is
    • A. Fe → Fe²⁺ + 2e⁻
    • B. Fe²⁺ + 2e⁻ → Fe
    • C. O₂ + 4e⁻ → 2O²⁻
    • D. 2H₂O → O₂ + 4H⁺ + 4e⁻
  6. The cathodic half-reaction in neutral water is
    • A. 2H⁺ + 2e⁻ → H₂
    • B. O₂ + 2H₂O + 4e⁻ → 4OH⁻
    • C. Fe → Fe²⁺ + 2e⁻
    • D. 4OH⁻ → O₂ + 2H₂O + 4e⁻
  7. Rusting is faster in salt water because
    • A. chloride ions oxidise the iron directly
    • B. salt lowers the activation energy of rusting
    • C. dissolved ions make the solution a better conductor
    • D. salt water dissolves far more oxygen
  8. Rusting requires both
    • A. water and carbon dioxide
    • B. oxygen and acid
    • C. heat and light
    • D. water and oxygen
  9. Iron does not rust in completely dry air because
    • A. water is needed to complete the circuit
    • B. oxygen is absent from dry air
    • C. dry air contains no nitrogen
    • D. iron is more reactive when it is wet
  10. Cathodic protection works by
    • A. making the iron the anode so it is protected
    • B. making the iron the cathode so it is not oxidised
    • C. coating the iron in a layer of its own oxide
    • D. raising the reduction potential of the iron
  11. A sacrificial anode must be a metal that is
    • A. less easily oxidised than iron
    • B. a better conductor than iron
    • C. more easily oxidised than iron
    • D. denser than iron
  12. Fe²⁺/Fe is −0.45 V. Which would work as a sacrificial anode for iron?
    • A. copper, at +0.34 V
    • B. silver, at +0.80 V
    • C. gold, at +1.50 V
    • D. zinc, at −0.76 V
  13. Why would copper not protect iron?
    • A. copper is harder to oxidise, so the iron corrodes
    • B. copper is too soft to be used as an anode
    • C. copper has no free electrons to give
    • D. copper is not an electrical conductor
  14. Galvanising is
    • A. coating iron with tin
    • B. coating iron with zinc
    • C. coating iron with paint
    • D. heating iron in pure oxygen
  15. Galvanised iron keeps protecting even when scratched because
    • A. the zinc layer reseals itself over the scratch
    • B. the scratch fills with rust and seals itself
    • C. the exposed zinc still corrodes in preference
    • D. iron does not rust in small patches
  16. Tin-plated steel, by contrast, once scratched
    • A. rusts more slowly at the scratch
    • B. does not rust at all
    • C. converts the tin into rust
    • D. rusts faster at the scratch
  17. Impressed-current cathodic protection uses
    • A. an external supply to hold the iron negative
    • B. a sacrificial block of magnesium only
    • C. a thick layer of grease on the surface
    • D. a continuous stream of hydrogen gas
  18. Painting protects iron by
    • A. making the iron the cathode of a cell
    • B. keeping water and oxygen away from the surface
    • C. oxidising the iron in a controlled way
    • D. raising the reduction potential of iron
  19. Aluminium resists corrosion despite being reactive because
    • A. it has a positive reduction potential
    • B. it does not react with oxygen at all
    • C. its oxide forms a tight protective layer
    • D. it is always painted before use
  20. A steel ship’s hull is commonly protected with blocks of
    • A. copper or brass
    • B. tin or lead
    • C. silver or gold
    • D. zinc or magnesium
Show answer key
Answer key — Corrosion and Cathodic Protection
  1. 1. A
  2. 2. B
  3. 3. C
  4. 4. D
  5. 5. A
  6. 6. B
  7. 7. C
  8. 8. D
  9. 9. A
  10. 10. B
  11. 11. C
  12. 12. D
  13. 13. A
  14. 14. B
  15. 15. C
  16. 16. D
  17. 17. A
  18. 18. B
  19. 19. C
  20. 20. D
Corrosion and Cathodic Protection — worksheetgalaxy.com