Twenty worked cell potentials by cathode minus anode, including two negative electrodes that still give a positive cell, what a negative answer actually means, and why a potential is never multiplied by a coefficient. Every value is given…
📋 20 questions
⏱ 15 min
⭐ Intermediate
🎓 Grade 12
⚗️
Calculating Standard Cell Potential
Twenty worked cell potentials by cathode minus anode, including two negative electrodes that still give a positive cell, what a negative answer actually means, and why a potential is never multiplied…
Twenty worked cell potentials by cathode minus anode, including two negative electrodes that still give a positive cell, what a negative answer actually means, and why a potential is never multiplied by a coefficient. Every value is given; every answer is explained.
Calculating Standard Cell Potential
Name: Date:
Questions in this quiz
The standard cell potential is calculated as
A. E°cathode − E°anode
B. E°anode − E°cathode
C. E°cathode + E°anode
D. E°cathode × E°anode
Given Cu²⁺/Cu at +0.34 V and Zn²⁺/Zn at −0.76 V, E°cell is
A. −0.42 V
B. +1.10 V
C. −1.10 V
D. +0.42 V
Given Ag⁺/Ag at +0.80 V and Cu²⁺/Cu at +0.34 V, E°cell is
A. +1.14 V
B. −0.46 V
C. +0.46 V
D. +0.23 V
In the silver and copper cell, which half-cell is the cathode?
A. the copper half-cell
B. either one will do
C. neither; both act as anodes
D. the silver half-cell
Given Ag⁺/Ag at +0.80 V and Zn²⁺/Zn at −0.76 V, E°cell is
A. +1.56 V
B. +0.04 V
C. −1.56 V
D. +0.78 V
How many electrons are transferred in Zn | Zn²⁺ ‖ Ag⁺ | Ag?
A. 1
B. 2
C. 3
D. 4
Does the number of electrons transferred affect E°cell?
A. yes; E°cell must be divided by the electron count
B. yes; E°cell must be multiplied by the electron count
C. no; the potential does not depend on how many move
D. yes, but only when more than two electrons move
Given Mg²⁺/Mg at −2.37 V and Cu²⁺/Cu at +0.34 V, E°cell is
A. −2.71 V
B. +2.03 V
C. +2.37 V
D. +2.71 V
Given Ni²⁺/Ni at −0.26 V and Ag⁺/Ag at +0.80 V, E°cell is
A. +1.06 V
B. +0.54 V
C. −1.06 V
D. +0.26 V
Given Pb²⁺/Pb at −0.13 V and Cu²⁺/Cu at +0.34 V, E°cell is
A. +0.21 V
B. +0.47 V
C. −0.47 V
D. +0.13 V
Given Al³⁺/Al at −1.66 V and Zn²⁺/Zn at −0.76 V, E°cell is
A. −0.90 V
B. +2.42 V
C. +0.90 V
D. +1.66 V
In the aluminium and zinc cell, the anode is
A. zinc
B. both of them
C. neither of them
D. aluminium
A calculated E°cell comes out at −0.35 V. This means
A. the cell as written is not spontaneous
B. the cell as written is spontaneous
C. the arithmetic must contain an error
D. the two electrodes must be identical
To make that −0.35 V reaction spontaneous, you should
A. double both of the half-reactions
B. swap which half-cell is the anode
C. raise the temperature to 100 °C
D. add more electrolyte to each half-cell
Why is a standard potential never multiplied by a coefficient?
A. it is measured in volts rather than in joules
B. the coefficients cancel when the halves are added
C. it is energy per unit charge, so it does not scale
D. it is only an approximate value in any case
Given Cl₂/Cl⁻ at +1.36 V and I₂/I⁻ at +0.54 V, E°cell for chlorine oxidising iodide is
A. +1.90 V
B. −0.82 V
C. +0.41 V
D. +0.82 V
Given Fe³⁺/Fe²⁺ at +0.77 V and I₂/I⁻ at +0.54 V, E°cell is
A. +0.23 V
B. +1.31 V
C. −0.23 V
D. +0.12 V
Two identical half-cells are connected together. E°cell is
A. +1.00 V
B. 0.00 V
C. −1.00 V
D. impossible to determine
A student uses E°anode − E°cathode and gets −1.10 V for the zinc and copper cell. The correct value is
A. −1.10 V, which is correct after all
B. +0.42 V
C. +1.10 V
D. −0.42 V
When the concentrations are not 1 mol/L, E°cell is
A. exactly the same as the standard value
B. found by averaging the two potentials
C. found by multiplying by the concentration ratio
D. replaced by a value found from the Nernst equation
Show answer key
Answer key — Calculating Standard Cell Potential
1. A
2. B
3. C
4. D
5. A
6. B
7. C
8. D
9. A
10. B
11. C
12. D
13. A
14. B
15. C
16. D
17. A
18. B
19. C
20. D
Calculating Standard Cell Potential — worksheetgalaxy.com